PSDFan Extra

Members Area Tutorial: Create an Advanced 3D Matte Painting Using Sketchup and Photoshop (Part 1)

Members Area Tutorial: Create an Advanced 3D Matte Painting Using Sketchup and Photoshop (Part 1)

This tutorial is a mammoth, and actually our longest, most in depth tutorial on record! It’s great to welcome Caroline to the team, and I’m sure you guys will learn a lot from her.

This tutorial was simply too long to post as a single post, with around 200 images and 57 incredibly detailed steps. As a result we have split it into two sections. Today’s section (Part 1) teaches you how to construct a complex building structure from scratch using the free software Google Sketchup. Part 2 will be posted this Friday and shows you how to take the 3D Sketchup model and use advanced matte painting techniques and advanced Photoshop skills to turn it into a realistic final scene.

Let’s get going!

A note from Caroline:

In this tutorial you’ll find out how to use a “sketch” created in a 3D application as the foundation for a matte painting. To create the 3D template we’ll use a nifty little program called Sketchup. Most 3D programs have a very steep learning curve but Sketchup, which was designed with 2D artists in mind, can easily be learned in as little as an hour or two. Best of all, Sketchup is free!

After we’ve created the 3D sketch, we’ll take it into Photoshop and turn it into a matte painting using photo manipulation techniques and some simple brush work.

Final Image

As always, this is the final image that we’ll be creating:

Resources Used In This Tutorial

Step 1

When you start Sketchup, you’ll see the start up screen. First of all, and this is optional, you might want to print the Quick Reference Card. It’s very handy to have close by, especially when you’ve never used Sketchup before.

Next, click the Choose Template button and pick “Architectural Design – Millimeters” from the list. To create a new file using this template, click the “Start using Sketchup” button at the bottom of the dialog.

Step 2

When the main screen appears, choose View > Toolbars from the menu and activate the toolbars we need as shown below.

Step 3

We’re now ready to start creating the structure.

Click on the Rectangle tool in the toolbar or press “R” on the keyboard. Position the cursor where the 3 axes converge until you see the word “origin” appear. Hold down the left mouse button and draw up along the blue line (the up or z-axis), Then draw along the red line (the across or x-axis), making sure not to stray from the red line. You’ll see a rectangle appearing. Without clicking anywhere, type “8m,10m”. The measurements appear in the bottom right corner of the screen as you type. Press Enter and a rectangle of 8 meters wide and 10 meters high is created.

The figure (which is called ‘Susan’ by the way) has vanished but we’ll sort that out later.

Step 4

Zoom out and pan the view with the middle mouse button as indicated on the Quick Reference Card, so that you can see the whole rectangle you just created.

Select the Push-Pull tool or press “P”. Click on the rectangle and pull towards the horizon. Type “10m” and press Enter. Take care not to forget the “m”, otherwise Sketchup thinks you mean millimeters instead of meters. The rectangle has now become a box of 8 meters wide, 10 meters high and 10 meters deep.

Press the spacebar to activate the Selection tool. Click on the front face of the box so it becomes selected. Press “Delete” to get rid of it.

Step 5

At the moment the structure is nothing more than a box. Let’s do something about it by creating the roof. Activate the Line tool by clicking on its icon in the toolbar or by pressing “L”. Next go to the Top view by clicking on its icon in the View toolbar. Zoom out so that you can see the whole top rectangle. Hover the mouse over the top edge until you see a cyan circle, click and drag down to the bottom edge. Move the mouse over the bottom edge until another cyan circle appears, when it does, click to create a straight line.

Switch to the front view by clicking on its icon in the View toolbar. Hit the Spacebar to activate the Selection tool. Click on the line you’ve just created to select it. The line will turn blue. Press “M” or click on the Move tool icon in the toolbar. Hover the mouse over the selected line, click and drag it up along the blue axis. You’ll know when the Move tool is on the blue axis because a blue dotted line appears as you drag. Type “3m” to raise the roof 3 meters and press Enter to confirm.

The basic structure is now finished. Next we’ll create some details inside the building.

Step 6

The back wall will have the most detail, so we’ll start there. Position the camera so that you can see the whole of the back wall. Press the Spacebar to activate the Selection tool and select Susan, she’ll turn blue. Press “Delete” to get rid of her.

To make our lives easier, we’ll first create some guidelines on the back wall. Press “T” to activate the Tape Measure tool. Hover the mouse over the bottom edge of the back wall until a red square and the text “On Edge” appear. Click and drag up. Type “3.25m” and press Enter. You now have a horizontal guideline at a height of 3.25 meters.

Step 7

Activate the Rectangle tool (R) and  hover the mouse over the point where the left edge of the  back wall intersects with the guide line. As soon as you see a red cross and the text “Intersection”, click and drag diagonally to the bottom right corner of the back wall. When a green circle with the text “Endpoint” appears, click to create the rectangle.

Select the Push-Pull tool (P), click on the new rectangle and drag down to extrude it. Type “1.5m” and press Enter to complete the extrusion.

To tidy up, zoom out a little using the mouse wheel and actvate the Eraser tool (E). Click on the horizontal guideline outside  the building to delete it. Do not try to click inside the building because that’ll erase parts of the building as well as the guide. It’s good practice to erase guidelines as soon as you’re done with them. If you don’t, the work area gets very messy very quickly and it becomes difficult to draw the shapes you need.

Step 8

To create the detail on the bottom half of the back wall, we need quite a lot of guidelines. Let’s start with the horizontal ones.

Starting at the bottom edge, create 2 new horizontal guides, using the Tape Measure tool (T) and the same method as in Step 6. Create a guide at 2.75m and another at 2m.

Next, create 6 vertical guidelines by dragging each one out from the left edge of the back wall, typing its position and pressing Enter. The positions are: 0.5m, 2.25m, 2.75m, 5.25m, 5.75m and 7.5m.

Step 9

Activate the Rectangle tool (R) and draw 3 rectangles using the guidelines as shown below:

To turn the rectangles into arches, activate the Arc tool by pressing “A” or clicking on its icon in the toolbar. Hover with the mouse over the top left point of the first rectangle until a green circle appears, then click. Move the cursor over to the right top corner of the rectangle and click again when you see a green circle. Drag the mouse up until the arc snaps to the top most horizontal guide. Click to finish.

Do the same for the other 2 rectangles to create 3 arches in total.

Step 10

The arches and the rectangles are still separate surfaces. To be able to work with them effectively each arch and its rectangle have to be combined. Activate the Eraser tool (E) and click on each dividing edge in turn. This creates 3 complete arches.

Select the Push-Pull tool (P). Click on the left arch and drag the cursor up to extrude the arch inwards. Type “0.5m” and press Enter to extrude the arch inwards by half a meter.

With the Push-Pull tool still active, double-click on the center arch. This extrudes the arch inwards by the last entered distance, which is 0.5m. To finish up, double-click on the right arch to extrude it as well.

Zoom  out until you can see the whole building. Select the Eraser tool and delete all  guidelines by clicking on them in turn. Make sure to click outside the building to avoid deleting any geometry. If all went well, your building now looks like this:

That’s the end of the preview!

About the Author:

My name is Caroline, I currently live in the Netherlands and I am a computer programmer turned graphic designer. I have been drawing and painting since I was allowed to hold a brush. Very recently I decided to make a life-long dream come true and to start up as an independent artist and designer. I hope you enjoy this tutorial. If you have any questions, please leave a comment below.

Leave a comment


No comments have been posted yet. Be the first!

Leave a Comment:

Related Posts

Your Design Work, But More Awesome:

Do you know the basic tools in Photoshop but feel that your work is still looking average? Join our creative community at FanExtra and get the direction you need to take your work to the next level.