Have every post delivered to your inbox and get access to hundreds of useful design freebies.
I had the idea for this tutorial when I browsing some of our most popular posts the other day. One of our most popular posts is our tutorial Create Smokey Typography in 12 Steps.
It still to this day is one of our highest trafficked posts, and has received plenty of positive comments.
However, all I could think when re-reading it the other day were two things:
1. I’ve come a long way as a designer and can honestly do better now. The effect is kind of cool, but in my opinion not all that realistic.
2. The workflow used is pretty dated now. It’s highly destructive, and uses an older version of Photoshop.
So anyway, this tutorial is my attempt at a more realistic smokey text effect (because I still had yet to find one I really liked on any site). I also used a more up to date workflow that’s almost entirely non-destructive (meaning you can edit your image later at any time). Oh, and if you were wondering, here is the outcome from the original tutorial:
Here is a preview of the image that we are going to be creating:
Create a new document (600X400px).
Create a new layer called ‘background’ and fill this layer with black.
Create a new layer called ‘clouds’.
Set your toolbar foreground color to 49667a and your background color to 1b2934.
Select your lasso selection tool and make it’s feather amount ’30px’. Then create a rough selection around the center of your canvas:
With your selection in place, go to filter>convert for smart filters.
Go to filter>render>clouds. Because your selection edge was feathered, your cloud area should have a nice soft edge:
Reduce this layer’s opacity to 40% to make the clouds more subtle:
Type out some text in the right-center of your canvas.
I used the free font Dancing Script, which you can download here.
Font Settings:
Font Face: Dancing Script
Font Size: 200pt
Kerning: -50
Color: ffffff
Change this text layer’s blend mode to ‘overlay’:
Now go to filter>convert for smart filters.
Then go to filter>blur>motion blur.
Motion Blur Settings:
Angle: 90
Distance: 20 pixels
This starts to give a bit of a smokey appearance:
Duplicate your text layer, reducing the opacity of the duplicate layer to 15%, otherwise it will be too bright:
Download one of the smoke images from the resources for this tutorial and paste it into your document, positioning it over your first letter:
Apply a hue/saturation adjustment layer, being sure to give this a clipping mask, so it only effects your underlying smoke layer.
Hue/Saturation Adjustment Layer Settings:
Hue: 0
Saturation: -100
Lightness: 0
Change your smoke layer’s blend mode to ‘color dodge’ and it’s opacity to 80%:
Now apply a layer mask to this layer and mask off areas of smoke that go outside your lettering too much. Use a soft, black paintbrush for this masking process:
Use the technique used in step 4 to add further smoke to your other letters using the smoke images from the resources section for this tutorial:
Download the FanExtra smoke brush set from the resources section for this tutorial.
Apply several of the brushes from the set using a white paintbrush. Resize and angle the brushes to fit roughly to the shape of your lettering:
Change this layer’s blend mode to ‘overlay’ and reduce it’s opacity to 60%:
Download the photo of a hand holding a cigarette from the resources section for this tutorial.
Paste it in and position/rotate as necessary:
Apply a layer mask and use a black paintbrush to mask off the background of the photo:
Now apply three adjustment layers, giving each a clipping mask so that your adjustments only effect your underlying hand layer.
Hue/Saturation Adjustment Layer Settings:
Hue: 0
Saturation: -80
Lightness: 0
Color Balance Adjustment Layer Settings:
Highlights: -9 / 0 / +8
Midtones: -36 / -6 / +21
Shadows: -8 / 0 / 0
Also: Select the layer mask that is created for this adjustment layer, and mask off the area over the cigarette. This means that your color adjustments will effect the rest of your hand photo, but not your cigarette, as we want this to retain it’s original color more.
Levels Adjustment Layer Settings:
15 / 1.12 / 233
Here is the result:
Paste in your third smoke image, positioning it like the image below:
Change this layer’s blend mode to ‘screen’ to hide it’s black background and then reduce it’s opacity to 40% to make the smoke more subtle:
Apply a layer mask and mask off most of the smoke, leaving one main plume like below:
Apply a hue/saturation and color balance adjustment layer (giving each a clipping mask):
Hue/Saturation Adjustment Layer Settings:
Hue: 0
Saturation: -100
Lightness: 0
Color Balance Adjustment Layer Settings:
Highlights: -66 / 0 / +9
Midtones: -4 / 0 / +21
Shadows: -25 / 0 / +5
This is the result:
Create a new layer called ‘smoke from cigarette’.
Apply one of the brushes from your smoke brush set using a white paintbrush:
Apply a color overlay blending option to this layer:
Color Overlay Blending Option Settings:
Blend Mode: Normal
Color: 88b7cf
Opacity: 100%
The result:
Download one of the smoke images from the resources section for the tutorial again, and paste it onto a new top layer called ‘smoke overlay’.
Keep the smoke really large so that it covers most of your canvas:
Change this layer’s blend mode to ‘screen’ and reduce it’s opacity to 8%. This should create a subtle smokey atmosphere over your composition:
Duplicate this layer and change the duplicate’s blend mode to ‘color dodge’. This helps add a little brightness into the smoke:
Create a new layer called ‘dodge/burn’.
Go to edit>fill>50% gray. Then change this layer’s blend mode to ‘overlay’. This will hide your 50% gray, but allow you to non-destructively dodge/burn your image.
Use a 10%, soft paintbrush (black to burn, white to dodge).
The images below show your dodge/burn layer at ‘normal’ blend mode and then ‘overlay’ blend mode:
For this step you’ll have to use a lot of your own judgement and creativity to get a nice effect. However, I’m going to show you how to use the ‘smudge’ tool non-destructively! You’ll be able to smudge your text and keep your text layers non-rasterized and fully editable.
Create a new layer called ‘smudge’ directly above your text layers.
Set your smudge tool to 20% strength, using a nice soft brush, and then very importantly check the box ‘sample all layers’. This will mean that even though there is no data on this layer currently, you will be able to smudge the data on all other layers.
Proceed to smudge your lettering upwards in various areas until you’re happy with the result.
This shows the ‘smudge’ layer at 30% opacity (at 100% opacity the effect was too strong):
Move this layer to be your top layer. This will make the effect slightly less obvious:
Create a new top layer called ‘smudge more’.
Repeat the step used in Step 13 to smudge your lettering more. I reduced this layer’s opacity to 60% to make the effect less strong:
I decided to mask off the corners of my cloud layer a little bit.
Then to finish the image, I went to layer>flatten image.
I flattened my image, selected the entire canvas and hit ‘copy’.
Then in my history palette I undid the ‘flatten image’ step, so that I get all my original layers back.
I paste my copied flattened image onto a new top layer and then go to filter>convert for smart filters.
Then I go to filter>sharpen>unsharp mask. Apply the settings below:
UnSharp Mask Settings:
Amount: 100%
Radius: 0.5 pixels
Threshold: 0 levels
Once you’ve applied your unsharp mask you’ll see that the filter comes with a mask of it’s own. Select this mask and use a soft black paintbrush to mask off all areas of your filter apart from over the fingers/initial plume of smoke from your cigarette.
Remember, you’re not masking the images, just the unsharp mask filter. This means that your sharpening filter will only effect these areas, not the rest of your image, which is perfect as we want our letting and background to remain hazy, not sharp.
You can view the final outcome below. I hope that you enjoyed this tutorial and would love to hear your feedback on the techniques and outcome.
Tom is the founder of PSDFAN. He loves writing tutorials, learning more about design and interacting with the community. On a more interesting note he can also play guitar hero drunk with his teeth.
Do you know the basic tools in Photoshop but feel that your work is still looking average? Join our creative community at FanExtra and get the direction you need to take your work to the next level.
Super tq! This is a real good tutorial, esp since I’m just a beginner at this kind of thing! I even managed to apply it on my small personal project called Element (just trying to apply typo-photoshop to the 4 elements…). Here’s the link if u want to see: http://www.facebook.com/media/set/?set=a.381516325227103.90475.100001062160401&type=1
Wow, that’s a really awesome personal project Anna! Very well executed. I’m so glad that this tutorial helped you, and I really like the typographic treatment you achieved with the smoke.
Lovely work, Tom, and beautifully explained, as always. Many thanks!
Thanks a lot Mark! I really liked the outcome of this piece.
Epic tutorial….
hue/saturation adjustment layer is not opening plz help
hii frnzz i m noob in photoshop can anyone make text effect of my name “tushar” in this type plzz it’s a humble request if u want to do so just contact me on “tushar.kalsara@gmail.com”
sir I am ryan from philippines how to download the source files ?
Hi Ryan. Source files are available to our members at http://fanextra.com. Membership gives you access to all tutorial source files, hundreds of advanced tutorials, thousands of resources, video courses and personal tuition from me whenever you need it.
Hi, this tutorial look great, but I’m stuck at step 5
Apply a hue/saturation adjustment layer, being sure to give this a clipping mask, so it only effects your underlying smoke layer.
Clipping mask should be added to adjustment layer or layer underneath? what would be the mask, content od adjustment layer or content of underneath layer ?? :confused
Thumbs. up! amazing thank you